MSB/TC 14 – MSB

MS ISO 374-5:2024 Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks

Titradevi Gopee — Wed, 24 Dec 2025 07:40:44 +0000

Scope

This document specifies the requirements and test methods for protective gloves intended to protect the user against micro-organisms.

NOTE If other protection features are needed, e.g. chemical risks, mechanical risks, thermal risks, electrostatic dissipation etc., the appropriate specific performance standard is used in addition. Further information on protective gloves standards can be found in the ISO 21420:2020+Amd 1:2022

MS ISO 11613:2017 Protective clothing for firefighter’s who are engaged in support activities associated with structural fire fighting — Laboratory test methods and performance

Titradevi Gopee — Wed, 24 Dec 2025 07:39:53 +0000

This document specifies test methods and minimum performance requirements for protective clothing used by firefighters who are engaged in support activities of firefighting. This clothing is not intended for interior attack firefighting. These support activities of firefighting are defined (see 3.8.2) as activities such as:

— water and material supply;
— extinguishing fires from the outside of the structure;
— prevention of exterior spreading to adjacencies, preventing enviromental damage and limiting effect of smoke;
— securing traffic and environment;
— first aid base activities.

This document covers the general clothing design, the minimum performance levels of the materials used, and the methods of test for determining these performance levels.

This document is not equivalent to ISO 11999-3, clothing worn by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures. This document provides lower minimum level of protection.

This document does not cover special clothing for use in other high risk situations such as specialized firefighting, or clothing for use in long term firefighting operations in high ambient temperature, for example bush, wildland, or forest firefighting where clothing according to ISO 15384 could be more appropriate. It does not cover clothing for use in high-risk fire exposures, for example reflective protective clothing according to ISO 15538 could be more appropriate.

It does not cover protection for the head, hands and feet or protection against other hazards, for example chemical, biological, radiation and electrical hazards. These aspects can be dealt with in other standards.

MS ISO 374-1:2024 Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks

Titradevi Gopee — Wed, 24 Dec 2025 07:39:00 +0000

Scope:

This document specifies the requirements for protective gloves intended to protect the user against dangerous chemicals and defines terms to be used.

NOTE If other protection features are covered, e.g., mechanical risks, thermal risks, electrostatic dissipation etc., the appropriate specific performance standard is used in addition. Further information on protective gloves standards can be found in the MS ISO 21420.

MS ISO 16976-6:2014 Respiratory protective devices — Human factors Part 5: Thermal effects

Avinash — Tue, 23 Dec 2025 06:07:49 +0000

General Information
Preview

Standard number	MS ISO 16976-5:2013
Title and Sub-titles	Respiratory protective devices — Human factors Part 5: Thermal effects
Status	Current
Replaces
Replaced by
Edition	First
Technical Committee	MSB/TC 14 - Personal Protective Equipment
ICS	13.340.30
Publication date
Corrected version
Government Notice No.
Number of Pages	14
Amendments/ Corrigendums
Availability	Yes
Note

See Preview in new tab

MS ISO 16976-5:2013 Respiratory protective devices — Human factors Part 5: Thermal effects

Avinash — Tue, 23 Dec 2025 04:56:51 +0000

General Information
Preview

Standard number	MS ISO 16976-5:2013
Title and Sub-titles	Respiratory protective devices — Human factors Part 5: Thermal effects
Status	Current
Replaces
Replaced by
Edition	First
Technical Committee	MSB/TC 14 - Personal Protective Equipment
ICS	13.340.30
Publication date
Corrected version
Government Notice No.
Number of Pages	15
Amendments/ Corrigendums
Availability	Yes
Note

See Preview in new tab

MS ISO 45002:2023 Occupational health and safety management systems — General guidelines for the implementation of ISO 45001:2018

Rajshree — Wed, 10 Dec 2025 11:20:08 +0000

General Information
Preview

Standard number	MS ISO 45002:2023
Title and Sub-titles	Occupational health and safety management systems — General guidelines for the implementation of ISO 45001:2018
Status	Current
Replaces
Replaced by
Edition	First
Technical Committee	MSB/TC 14 - Personal Protective Equipment
ICS	13.100; 03.100.70
Publication date	2024/04/13
Corrected version
Government Notice No.	General Notice No. 407 of 2024
Number of Pages	70
Amendments/ Corrigendums
Availability	Yes
Note

See Preview in new tab

MS ISO 16972:2020 Respiratory protective devices — Vocabulary and graphical symbols

Rajshree — Wed, 03 Dec 2025 14:03:24 +0000

Scope:

This part of ISO/TR 17870 defines the quality of thin ceramic tiling and provides guidance for materials selection, installation, and use, to achieve required levels of quality and performance. It considers aspects related to the specification and installation of the tiling project, in terms of:
— manufacture and distribution of the materials (thin ceramic tiles and panels, adhesives, grouts, etc.),
— specification of the thin tiling, and
— installation of the tiling (thin tile fixing operations).

It is applicable to internal and external thin ceramic floor and wall tiling, installed by adhesive methods. NOTE The quality of thin ceramic tiling depends on the following general characteristics:
— regularity;
— durability;
— safety.

The durability of the thin tiling can depend on its use and management.

General Information
Preview

Standard number	MS ISO 16972:2020
Title and Sub-titles	Respiratory protective devices — Vocabulary and graphical symbols
Status	Current
Replaces	MS ISO 16972:2010
Replaced by
Edition	Second
Technical Committee	MSB/TC 14 - Personal Protective Equipment
ICS	01.040.13; 13.340.30
Publication date
Corrected version
Government Notice No.
Number of Pages	38
Amendments/ Corrigendums
Availability	Yes
Note

MS ISO 17420-1:2021 Respiratory protective devices — Performance requirements Part 1: General

Rajshree — Wed, 03 Dec 2025 13:57:50 +0000

General Information
Preview

Standard number	MS ISO 17420-1:2021
Title and Sub-titles	Respiratory protective devices — Performance requirements Part 1: General
Status	Current
Replaces
Replaced by
Edition	First
Technical Committee	MSB/TC 14 - Personal Protective Equipment
ICS	13.340.30
Publication date
Corrected version
Government Notice No.
Number of Pages	12
Amendments/ Corrigendums
Availability	Yes
Note

See Preview in new tab

MS ISO 21420:2020 Protective gloves — General requirements and test methods

Rajshree — Wed, 03 Dec 2025 13:52:21 +0000

General Information
Preview

Standard number	MS ISO 21420:2020
Title and Sub-titles	Protective gloves — General requirements and test methods
Status	Current
Replaces
Replaced by
Edition	First
Technical Committee	MSB/TC 14 - Personal Protective Equipment
ICS	13.340.40
Publication date
Corrected version
Government Notice No.
Number of Pages	24
Amendments/ Corrigendums
Availability	Yes
Note

See Preview in new tab

MS ISO/TR 21808:2021 Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters

Avinash — Fri, 14 Jul 2023 11:05:04 +0000

Scope:
This document sets out guidance for the selection, use, care and maintenance of PPE designed to provide
protection for firefighters while carrying out their duties.
The PPE covered in this document is intended for firefighting personnel exposed to risks associated
with but not necessarily limited to the following activities:
— structural firefighting;
— wildland firefighting;
— incidents involving hazardous materials;
— incidents involving motor vehicle;
— urban search and rescue.

General Information
Preview

Standard number	MS ISO/TR 21808:2021
Title and Sub-titles	Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters
Status	Current
Replaces	MS ISO/TR 21808:2009
Replaced by
Edition	Second
Technical Committee	MSB/TC 14 - Personal Protective Equipment
ICS	13.340.10
Publication date	2023/04/21
Corrected version
Government Notice No.	General Notice No. 529 of 2023
Number of Pages	80
Amendments/ Corrigendums
Availability	Yes
Note

See Preview in new tab